Material Specifications

• XFrame panels made from untreated structurally rated and plantation harvested Pinus Radiata Plywood (Stress Grade F8 – AS/NZS 2269 / NZS 1720.1).   

• Phenol formaldehyde resins used in production of plywood meets emission standards equivalent to Super E0. 

• FSC / Declare / Country of Origin Specification available on request at time or order and subject to availability.  

• 70mm thick polyester die-cut with min. 60% recycled feedstock cavity acoustically rated insulation (min. 14kg/m3).  

• Substrates made from 17mm untreated Pinus Radiata Plywood or E0 MDF (subject to acoustic requirements) fixed to XFrame structural wall panels via XF010 fixing hardware.  

• Laminate or Veneer (subject to specification) on 16mm E0 MDF / Saveboard Carcuss / ZeroE (subject to specification) fixed to XFrame structural wall panels via XF010 fixing hardware. 

• 12mm Acoustic Finishes (PET – DBSORB, Autex or EchoPanel - subject to specification) fixed to substrate using ReadyClip mounting hardware.   

Glazed Door

• 900mm x 2200mm Solid Timber Door with 8.38mm Glazed Insert.  

• Tasmanian Oak, Abodo or Beech Timber Styles/Jambs (on request).   

• 128mm jambs / nominal wall thickness.  

• Stainless Steel fixed pin hinges and perimeter acoustic seals.  

• Door unit pre-mounted in 1200mm x 2650mm XFrame panel.  

• Brushed stainless steel accessibility compliant handle with strike.    

Glazed Windows 

• 510mm x 2000mm glazed windows with solid timber jambs. 

• 12.5mm laminated acoustic glazing (as standard).  

• Glazing unit pre-mounted in 600mm x 2650mm XFrame panel.  

• Timbers finished with Ilva Aquatech Waterbased Clear Sealer and Topcoat system.  

• 128mm jambs / nominal wall thickness.  

• Windows supplied without privacy vinyl as standard (supplied on request). 

Pre-wired Plug n’ Play Electrical:

XFrame spaces are powered by MyModular’s MYLEX soft-wire plug-and-play electrical systems. These offer full softwire functionality for large demountable rooms – incorporating lighting, power supply, and ventilation. Soft wiring kits are made to order in Australia, which allows them to be easily customised to suit architectural requirements.

Softwire systems unlock life-cycle circularity by simplifying end-of-life deconstruction and reconfiguration.

• Australian Made MyModular MYLEX Modular Softwire Electrical System with Double Clipsal GPO with USB C (min. 1 per room).

• Recessed LED downlights with adjustable colour temperature and brightness.

• Quad 240v 140mm Fans (at 2400RPM / 10-16ACH) vented intake.

• Adjustable PIR occupancy sensor to lights and ventilation.

• Replaceable fused pluggable terminal.